New softener installed and properly sized to your household's water usage, plumbed into your existing supply line with a full test run.
Installing a softener where one didn't exist before means more than setting a tank in the basement or utility closet. It involves tying into your main supply line ahead of the water heater, running a drain line for the brine tank's backwash cycle, and — critically — sizing the unit correctly for your household's actual water usage and hardness level, not just picking whatever's in stock.
We size every installation to your real numbers: your household's daily water use, your water's actual hardness (tested on-site, not assumed), and any iron or manganese content that affects resin capacity. An undersized unit regenerates constantly and wears out fast; an oversized one wastes salt and water. Every installation is tested under running water and re-tested with a hardness reading before we call the job done.
Tell us what's happening — hard water, a stuck cycle, or a leak — and we'll give you a same-day or next-day appointment window.
A technician tests your actual water hardness at the tap and inspects the valve, resin, and brine tank before recommending anything.
You get a clear price before any work begins — repair or new unit installation, no surprise add-ons after the fact.
Most repairs and standard installations are completed in a single visit, using a properly sized unit when replacement is the better option.
Every unit is tested through a full cycle and re-checked for hardness before we consider the job finished, with a quick walkthrough of what to watch for.
Most softener repairs cost far less than a full replacement — we'll always tell you honestly which one makes more sense for your unit's age and condition.
| Service | Typical Price | What Affects It |
|---|---|---|
| Diagnostic visit / minor repair (salt bridge, bypass valve) | $89–$175 | Most single-visit repair calls |
| Control valve repair or rebuild | $150–$400 | Depends on whether it's a seal/program fix or a full valve rebuild |
| Resin tank recharge or replacement | $200–$450 | Varies by tank size and whether the bed needs full replacement |
| Brine tank, float, or injector repair | $120–$250 | Common after a salt bridge or high-water symptom |
| Leak repair | $100–$300 | Depends on whether it's a fitting/seal or the tank body itself |
| Full system replacement (unit + installation) | $900–$2,500 | Varies by household size, water hardness, and iron content |
Ranges are estimates for typical jobs. Final pricing is confirmed on-site before work begins.
We're adding new cities regularly. Water Softener Installation is currently available in:
Red Wing's municipal water, drawn from deep groundwater wells, tests at 16–17 grains per gallon of hardness — firmly in the "very hard" range — plus naturally occurring iron that a softener has to fight every single day.
View Red Wing Service AreaLayton draws its water from the Weber Basin regional system, which tests at roughly 15–20 grains per gallon of hardness — hard enough that Davis County is regularly cited among the hardest municipal water in the country.
View Layton Service AreaBountiful's water, drawn from the same Weber Basin regional system serving Davis County, tests at roughly 15–20 grains per gallon of hardness — a steady daily load on a softener's resin and valve components.
View Bountiful Service AreaClearfield's municipal water, part of the same Weber Basin regional system serving Davis County, tests at roughly 15–20 grains per gallon of hardness.
View Clearfield Service AreaKaysville draws from the same Weber Basin regional water system as the rest of Davis County, testing at roughly 15–20 grains per gallon of hardness — a steady daily strain on a softener's resin and valve.
View Kaysville Service AreaClinton shares the same Weber Basin regional water system as the rest of Davis County, testing at roughly 15–20 grains per gallon of hardness.
View Clinton Service AreaSyracuse — the gateway city to Antelope Island via its causeway — draws the same Weber Basin regional water as the rest of Davis County, testing at roughly 15–20 grains per gallon of hardness.
View Syracuse Service AreaSunset, one of Davis County's smallest cities at just 1.3 square miles, shares the same Weber Basin regional water supply — testing at roughly 15–20 grains per gallon of hardness.
View Sunset Service AreaPhoenix blends Colorado River water from the Central Arizona Project with Salt and Verde River water from the Salt River Project, both carrying enough desert mineral content to test at 15–20 grains per gallon of hardness.
View Phoenix Service AreaOxnard blends imported State Water Project supply with local groundwater, landing at a citywide average around 17 grains per gallon of hardness — though it swings from about 12 to 24 GPG depending on which source is feeding a given part of town.
View Oxnard Service AreaAlexandria's water, supplied by Fairfax Water from the Potomac River and Occoquan Reservoir, tests at a moderate 9 grains per gallon — hard enough to matter, but noticeably gentler than many U.S. cities.
View Alexandria Service AreaMost homes outside downtown Fairbanks run on private wells, not municipal water — and USGS testing shows those wells vary widely, with iron levels up to 46 mg/L and hardness ranging from soft to extremely hard depending on the specific property.
View Fairbanks Service AreaIt depends on your household size and your water's actual hardness and iron content, which we test on-site rather than guess — an undersized unit regenerates too often and wears out fast, so getting this right matters more than picking the biggest available unit.
Yes — this is one of our most common installation calls. We'll assess your existing supply line, drain access, and electrical outlet location and let you know upfront if anything beyond a standard installation is needed.
A standard installation typically takes 2–3 hours, depending on how easy the existing plumbing is to tie into and whether a new drain line needs to be run.
Open 24 Hours a Day, 7 Days a Week
Call now for same-day or after-hours water softener installation — upfront pricing, no surprises.
